FleetPulseGO Track Product Manual
Written by Austin Kinney
Updated at June 2nd, 2025
Table of Contents
FleetPulseGO
Track
Manual
Table of Contents |
FleetPulseGO Track is a low-cost, ultra-compact asset tracker for fleet visibility and asset recovery insights. Track requires no maintenance or hardwiring, withstands extreme temperatures, and features up to seven years of battery life—without replacements. Combined with its design for quick and discreet placement, Track is truly the ultimate “set it and forget it” tracker for fleet protection.
® Up to 7-year of battery life for extended, worry-free tracking and recovery
® Ultra-compact design for discreet placement anywhere
® No hardwiring and zero maintenance required
® Customizable, automated check-ins
® Expansive, accurate cellular and GPS coverage
® Install indicators provide deployment-ready confirmation
® 3-axis accelerometer, motion / no motion, and impact detection
® Configurable modes based on the movement or recovery of various assets
® GPS Location
® Motion Detection
® 7-10 Year Battery
Cellular Technology Options | |
LTE |
4G Cat M1 |
Power Requirements | |
Internal Battery |
Internal 3.6V battery |
Mechanical | |
Case Material |
Plastic (Black) |
Dimension |
2.80” x 2.80” x 1.97” |
Weight |
8 oz. |
Mounting |
8lbf. Base magnet |
Operating Temperature |
-22°F to +140°F |
Certifications | |
IP |
- IP67 |
4. Installation Procedures |
4.1. FleetPulseGO Track Installation Time
Activity |
Duration |
Set up of tools and safety equipment |
2 minutes |
Pair Track device serial number with trailer VIN asset |
1 minute |
Track device mounting and installation |
2 minutes |
4.2. Tools and Materials Required
® Safety Glasses |
|
® Mechanics Gloves | |
® Clean Rags | |
® Scotch Pad | |
® Steel Zip-tie Tightening Tool |
The FleetPulseGO Track device is designed to report data in various mounting positions.
Recommended mounting and installation locations on a trailer:
® Below, near, or around the landing gear or in various areas inside and around the axles.
® Inside the crossmembers of the trailer belly.
® On / inside / around the mounted accessory equipment below the trailer.
® On the rear mudflap crossmember bracket or near docking bumper area / rear underride guard.
® Inside a TRU accessible area.
1. Position device in desired mounting location using base magnet.
2. Wrap around zip-ties and secure loose guided inside grooves.
3. Using zip-tie tool, tighten zip-ties until device mounting component, and zip-ties are flush, molded. TIP: Tighten to the tool limit.
4. Cut excess zip-ties from the tightened position.
5. If you have the newer version track unit with built in brackets, you can alternatively use self-tapping screws to mount the Track directly to the install location.
NOTE: If you're having trouble finding a suitable location on a used semi-trailer, you can mount the Track device underneath, inside the landing gear wing plate. Just make sure the surface is cleaned and drilled before installation.
Mode |
Reporting Frequency |
Expected Sensors |
Ship Mode |
N/A |
N/A |
Trip Mode |
1 GPS Location and Tether Status report every 24 hours 1 Tether Status report immediately when asset is moved 1 GPS Location and Tether Status report when asset has stopped moving after 30 minutes 1 Check-in report every 8 hours when not in motion – listening for a mode change. |
® GPS Location ® Tether Status (Untethered)
|
|
|
|
Recovery Mode |
1 GPS Location and Tether Status report every 5 minutes when asset is in motion. |
® GPS Location ® Tether Status (Untethered) |
NOTE:
§ Recovery Mode is designed for users to monitor asset location and real-time movement for short durations.
§ Recovery Mode has a high impact on battery life.
§ Recovery Mode is preprogrammed to last for 3 days after which it changes to Normal Mode.
§ Trip Mode is designed for users to monitor asset location and movement.
§ Trip Mode has a medium impact on battery life and depletion rate will depend on the number of trips taken per day.
Requirement: Download the FleetPulse Mobile Application. iOS; Android.
|
1. Login with your verified FleetPulse credentials
Contact your designated FleetPulse admin or support@fleetpulse.com for help. |
2. Select the three vertical bars to reveal the menu and select “Installation”.
|
3. Select Track (Sensata XT5300). |
|
4. Scan the VIN barcode or QR code to populate and select "Proceed”. |
5. Scan the device serial number and select “Proceed”. |
6. Verify VIN and Serial # and select “Proceed with pairing”. |
|
7. When all expected sensors are green, open and close the trailer door to trigger an image capture. |
|
NOTE: Pairing will not be successful if the asset is already associated with another device. Contact support@fleetpulse.com for help.
FleetPulse recommends performing the following maintenance actions at least once every 12 months:
1. Data quality check:
® All Sensors should be reporting as expected in the FleetPulse platform.
® Connectivity Status should be green and read as Good.
® If any sensors are not reporting, please reach out to support@fleetpulse.com for troubleshooting help.
2. Inspect Track device location and ensure device is securely attached:
® Check for physical damage on device.
® If using a mounting bracket, ensure the bolts are secure and tightened.
® If using steel zip ties, ensure zip ties are tight and not missing.
® Track should not be able to shift or move once fastened to the asset.
Devices should arrive activated from the factory, if a device is not reporting after being paired, follow these steps to activate it.
Device activation is best performed with the device outside under open sky for fast location fix and reduced platform check-in time.
1. Press & hold the Push Button until the LED Status Light begins to flash Green.
® TIP: Count to 5 when LED starts to flash.
2. When the LED Status light is solid Green, release the button.
® Green signifies both GPS and Cellular have connected successfully.
3. The LED will flash Blue as it connects to the cellular network for the first time.
4. The LED will then flash Orange as it acquires GPS fix.
5. The LED will then flash Blue as it connects to the cellular network.
6. The Track device will enter TRIP mode and display LED color according to condition:
Solid Green |
LTE and GPS both successful |
Solid Blue |
LTE only successful |
Solid Red |
LTE failure |
® If the button is not held the LED will flash Green, then White and will not exit ‘SHIP’ mode.
® GPS fix may be affected by surrounding buildings, covered/underground parking structures, trees, geography, or may be installed in a position that degrades or blocks GPS signal reception.
® Check LTE reception in the area and reposition device if surrounded by metal and perform commissioning process again
For more information on this product, please contact support@fleetpulse.com.
Thank you for your business.
FleetPulse